Brief & Tech Pack
Share a sketch, a sample garment or a full tech pack. We translate it into a production-ready spec sheet with measurements, fabric call-outs, trim list and print placement.
Fight Wear
Fight & Combat Wear
Competition-grade MMA, boxing, wrestling and grappling apparel built for abrasion and stretch under load.
Overview
Competition-grade MMA, boxing, wrestling and grappling apparel built for abrasion and stretch under load.
Combat apparel fails at the seams first. Our fight wear uses reinforced stress-point construction, bar-tacked panel joins and high-abrasion fabrics selected per discipline. Rash guards are cut for compression through the shoulder, and fight shorts carry split-side or four-way-stretch gussets for a full guard position.
Worth knowing
Every fight short we build is stress-tested at the gusset and the hook-and-loop closure before the style is cleared for bulk.
6 product lines
Product Lines
What we build in this category
Select any line to see how we build it — fabric, construction, options and decoration. Every one is made to order, and these specs are starting points rather than limits.
Rash Guards
Short and long sleeve, sublimated full printRash guards are cut for compression through the shoulder and chest so the fabric does not bunch under a grip. Seams are flatlocked and taped where they cross a high-abrasion zone, and the sublimated print covers the full panel with no cracking point.
- Fabric
- Poly/spandex 82/18, 200–260 GSM, chlorine and abrasion resistant
- Construction
- Flatlock seams, taped inner seams, raglan or set-in sleeve
- Options
- Short sleeve, long sleeve, sleeveless; ranked collar band available
- Decoration
- Full sublimation edge to edge, silicone grip print at hem
BJJ Gi & Kimono
Pearl weave jacket with ripstop trouserPearl weave jacket with a ripstop or cotton drill trouser, built to the weight your academy specifies. The collar is the part that gets pulled hardest — ours is a multi-layer construction with a rubber or EVA core and chain-stitched reinforcement, not a rolled-fabric shortcut.
- Fabric
- Pearl weave cotton 350–550 GSM jacket; ripstop or drill trouser
- Construction
- Reinforced multi-layer collar, chain-stitched seams, gusseted trouser
- Options
- Adult and youth sizing, preshrunk, rope or flat drawcord waist
- Decoration
- Embroidery, woven and sublimated patches, contrast stitching
Wrestling Singlets
Full print, high or low cut legCompetition singlets in full print, cut high or low at the leg to the rule set you compete under. Four-way stretch with a high recovery rate so the garment holds shape through a tournament rather than a single bout.
- Fabric
- Poly/spandex or nylon/spandex, 200–250 GSM, high recovery
- Construction
- Flatlock seams, bound leg and armhole, gusseted
- Options
- High cut or low cut leg, youth and adult sizing, contrast panels
- Decoration
- Full sublimation, sublimated club and sponsor placement
Grappling Spats
Compression fit with reinforced knee panelGrappling spats sit under shorts and take constant mat abrasion, so the knee panel is doubled and the waistband is wide enough to stay flat under a belt. Print runs the full leg with no seam break in the graphic.
- Fabric
- Poly/spandex 82/18, 240–290 GSM, abrasion resistant
- Construction
- Reinforced double knee panel, flatlock seams, gusseted crotch
- Options
- Full length or 3/4, wide or standard waistband, silicone hem gripper
- Decoration
- Full sublimation, silicone print, rubber patch
Muay Thai Shorts
Traditional wide-leg cut with side slitsTraditional wide-leg Muay Thai shorts with deep side slits and the characteristic high-rise waistband. Cut properly, these allow a full high kick without the hem catching — which is the whole point of the silhouette.
- Fabric
- Satin, nylon or poly blend; 140–200 GSM
- Construction
- Wide elasticated waistband, deep side slits, generous leg opening
- Options
- Traditional or modern cut, contrast waistband, metallic trim
- Decoration
- Embroidery, applique, screen print, sublimated panel
Compression Fight Tops
Sleeveless and full-sleeve variantsCompression tops for training and weight management, cut close through the torso with flatlock seams that will not chafe under a gi or a rash guard. Available sleeveless through to full sleeve in the same block.
- Fabric
- Poly/spandex 82/18 or nylon/spandex, 200–250 GSM
- Construction
- Flatlock seams, raglan sleeve, bound or self-finished neck
- Options
- Sleeveless, short sleeve, long sleeve; mock neck option
- Decoration
- Full sublimation, silicone print, reflective detail
Fabrics
Base fabrics we run for fight wear
These are our usual starting points. If you have a performance target — GSM, stretch recovery, wicking, opacity — give us that instead and we will source to it.
Construction & Decoration
Techniques available
Combine as many as the design needs. Decoration is specified on the tech pack and proofed on the sample before bulk.
Next Step
Ordering fight wear
Send us four things and we can quote properly: the product, the quantity, your fabric or performance preference, and your deadline.
Fabric & Trim Sourcing
We source and lab-dip to your colour reference, then send physical swatches for approval before any bulk fabric is committed.
Pattern & Sampling
First pattern, fit sample, and as many revisions as the fit needs — typically 10 to 15 days to a sample in your hands. Nothing moves to bulk until you sign off a sealed sample.
Other categories
All products
06 lines
Activewear & Gym Wear
Performance-first training apparel engineered for stretch recovery, moisture management and shape retention.
Explore category Activewear & Gym Wear
04 lines
Team Sports Uniforms
Full-sublimation club, school and league kits produced to exact colour and crest specification.
Explore category Team Sports Uniforms
08 lines
Fitness & Training Apparel
Layering pieces and tracksuits that bridge the gym floor and the street without losing performance.
Explore category Fitness & Training Apparel