Brief & Tech Pack
Share a sketch, a sample garment or a full tech pack. We translate it into a production-ready spec sheet with measurements, fabric call-outs, trim list and print placement.
Streetwear
Casual & Streetwear
Heavyweight blanks and finished streetwear cut to modern oversized and boxy blocks.
Overview
Heavyweight blanks and finished streetwear cut to modern oversized and boxy blocks.
Streetwear lives and dies on handfeel and fit block. We run heavyweight combed cotton from 180 GSM tees through to 500 GSM hoodies, with garment-dye, acid-wash, stone-wash and enzyme-wash finishing available so each drop has its own character rather than reading as a stock blank.
Worth knowing
Wash finishing is done per piece, so no two garments in an acid-wash run are identical — which is the point.
6 product lines
Product Lines
What we build in this category
Select any line to see how we build it — fabric, construction, options and decoration. Every one is made to order, and these specs are starting points rather than limits.
Oversized Drop-Shoulder Tees
Extended shoulder, wide bodyThe drop-shoulder block is what makes an oversized tee read as designed rather than simply too big. We grade the shoulder drop through the size run so the proportion holds from XS to 3XL instead of collapsing at the extremes.
- Fabric
- Heavy combed cotton jersey, 220–280 GSM
- Construction
- Extended shoulder, wide body, deep armhole, ribbed collar
- Options
- Boxy or long-line body, raw or twin-needle hem, side split
- Decoration
- Screen print, puff, DTG, back and sleeve print, embroidery
Polo Shirts
Pique or interlock, rib or self collarPique and interlock polos with a choice of self-fabric or rib collar. The placket is the detail that separates a good polo from a corporate giveaway — we build a clean, properly interlined placket with matched buttons.
- Fabric
- Cotton pique or interlock, 180–220 GSM; poly/cotton available
- Construction
- Interlined placket, rib or self collar, side vents, twin-needle hem
- Options
- 2 or 3 button, short or long sleeve, contrast collar and placket
- Decoration
- Embroidery, screen print, woven badge, heat-transfer label
Shorts & Swim Shorts
Mesh-lined, elastic or fixed waistCasual and swim shorts with mesh lining and a choice of elastic or fixed waist. The swim versions use a quick-dry shell with a proper mesh brief rather than a lining that bunches after one wear.
- Fabric
- Cotton twill, poly ripstop or quick-dry poly; mesh lining
- Construction
- Elastic or fixed waist, mesh brief lining, bar-tacked pockets
- Options
- 5"–9" inseam, drawcord or belt loops, back zip pocket
- Decoration
- Screen print, embroidery, heat transfer, woven label
Vests & Tank Tops
Ribbed and jersey constructionsRibbed and jersey vests that sit in the gap between a tee and a tank. Cheap to add to a range, and they pull a collection together when cut on the same block as the tee programme.
- Fabric
- Rib knit or combed cotton jersey, 180–240 GSM
- Construction
- Bound or self-finished armhole and neck, side-seamed
- Options
- Ribbed or flat jersey, cropped or longline, scoop or crew neck
- Decoration
- Screen print, DTG, embroidery, heat-transfer label
Long-Sleeve Tees
Sleeve-print and back-print readyLong-sleeve tees built for sleeve and back printing, which is where most of the design usually goes in this category. Cuff is ribbed or self-fabric depending on whether the look is athletic or relaxed.
- Fabric
- Combed cotton jersey, 180–240 GSM
- Construction
- Set-in or drop shoulder, rib or self cuff, shoulder-to-shoulder tape
- Options
- Regular or oversized, thumbholes, layered double-sleeve effect
- Decoration
- Sleeve print, back print, screen, DTG, puff, embroidery
Knitwear & Cardigans
Jacquard and intarsia knit optionsKnitted pieces including jacquard and intarsia patterning, which allow a graphic to be built into the fabric rather than printed on top. Gauge and yarn composition are both specified to your brief.
- Fabric
- Cotton, acrylic or blended yarn; 5GG–12GG gauge
- Construction
- Full-fashion or cut-and-sew, rib collar, cuff and hem
- Options
- Crew, v-neck, cardigan or zip-through; jacquard or intarsia pattern
- Decoration
- Knitted-in pattern, embroidery, woven label, leather patch
Fabrics
Base fabrics we run for streetwear
These are our usual starting points. If you have a performance target — GSM, stretch recovery, wicking, opacity — give us that instead and we will source to it.
Construction & Decoration
Techniques available
Combine as many as the design needs. Decoration is specified on the tech pack and proofed on the sample before bulk.
Next Step
Ordering streetwear
Send us four things and we can quote properly: the product, the quantity, your fabric or performance preference, and your deadline.
Fabric & Trim Sourcing
We source and lab-dip to your colour reference, then send physical swatches for approval before any bulk fabric is committed.
Pattern & Sampling
First pattern, fit sample, and as many revisions as the fit needs — typically 10 to 15 days to a sample in your hands. Nothing moves to bulk until you sign off a sealed sample.
Other categories
All products
06 lines
Activewear & Gym Wear
Performance-first training apparel engineered for stretch recovery, moisture management and shape retention.
Explore category Activewear & Gym Wear
04 lines
Team Sports Uniforms
Full-sublimation club, school and league kits produced to exact colour and crest specification.
Explore category Team Sports Uniforms
06 lines
Fight & Combat Wear
Competition-grade MMA, boxing, wrestling and grappling apparel built for abrasion and stretch under load.
Explore category Fight & Combat Wear